Chrome Facts
Chrome- Real vs. Imitation
Check Out Our Novelty Chrome Here
| Real Chrome |
Imitation |
| 1. Cost Much More To Process | 1. Inexpensive |
| 2. 3 Layers Of Metal | 2. Vapor Film |
| 3. Virtually Scratch Resistant | 3. Easily Scratches |
|
4. Deep, Rich Shine |
4. Dull Finish |
We Use the Same Chrome That You Will Find On Your Motorcycle. This Chrome Has Been Proven To Last Longer Than Imitation Chrome. The Reason Real Chrome Cost So Much More Is That It Goes Through A Multiple Metal Dipping Process. First Nickel, Then Copper And Last Chrome. As You Can Imagine, This Is A Lengthy Process But The End Result Speaks For Itself - A Thick, Hard Coat Of Metal With Deep Rich Shine Virtually Scratch Resistant, Whereas Most Other Helmet Manufacturers Use A Process Called Vacuum Metallization. This Is By Far the Fast, Inexpensive Way To Achieve The Appearance Of Real Chrome At A Fraction Of The Cost.
This Process Is Simple, Done By Applying A thin Film Of Chrome Vapors Onto The Shell. At First, The Results May Appear The Same But Will, In Fact, Tremendously Vary. What You End Up With Is A Much Thinner Single Layer Of Chrome That Will Easily Scratch, Flake Or Fade With Wear.
Now that you know all chrome is not alike, which would you prefer?
Daytona Helmets
Helmet Size Chart & Fit Guide
Select your Daytona model, enter your head measurement, and use our size finder to receive a recommended starting size.
Helmet Size Finder
Find Your Recommended Size
Select the Daytona model you are interested in, enter your head measurement, and we’ll recommend the closest starting size based on that model’s sizing guide.
How To Measure
Measure Your Head First
Use Soft Tape
Use a soft, flexible measuring tape. Do not overtighten the tape.
Measure Above Eyebrows
Measure approximately 1 inch above the eyebrows and around the widest part of the head.
Take Several Measurements
Take a few measurements and use the largest measurement as your starting point.
Use The Finder
Select your Daytona model and enter your measurement to receive a recommended starting size.
Size Charts
Reference Size Charts
Select the chart that matches your Daytona model. The size finder above automatically uses the correct sizing guide.
| Helmet Size | Head Circumference CM | Head Circumference IN | Hat Size IN |
|---|---|---|---|
| 3XS | 41 – 43 cm | 16 1/8" – 16 7/8" | 5 1/8 – 5 3/8 |
| 2XS | 43.5 – 45.5 cm | 17 1/8" – 17 7/8" | 5 1/2 – 5 3/4 |
| XS | 46 – 48 cm | 18 1/8" – 18 7/8" | 5 3/4 – 6 |
| S | 48.5 – 50.5 cm | 19 1/8" – 19 7/8" | 6 1/8 – 6 3/8 |
| M | 51 – 53 cm | 20 1/8" – 20 7/8" | 6 3/8 – 6 5/8 |
| L | 53.5 – 55.5 cm | 21 1/8" – 21 7/8" | 6 3/4 – 7 |
| XL | 56 – 58 cm | 22" – 22 7/8" | 7 – 7 1/4 |
| 2XL | 58.5 – 60.5 cm | 23" – 23 7/8" | 7 3/8 – 7 5/8 |
| 3XL | 61 – 63 cm | 24" – 24 3/4" | 7 5/8 – 7 7/8 |
| 4XL | 63.5 – 66 cm | 25" – 26" | 8 – 8 1/4 |
| Size | CM | IN |
|---|---|---|
| XS | 53 – 54 | 20 7/8" – 21 1/4" |
| S | 55 – 56 | 21 5/8" – 22" |
| M | 57 – 58 | 22 1/2" – 22 7/8" |
| L | >58 – 60 | >22 7/8" – 23 5/8" |
| XL | 61 – 62 | 24" – 24 3/8" |
| 2XL | 63 – 64 | 24 3/4" – 25 1/8" |
| 3XL* | 65 – 66 | 25 5/8" – 26" |
| 4XL* | 67 – 68 | 26 3/8" – 26 3/4" |
C6 / C6 PRO sizing cutoff: 58.0 cm remains Medium. Measurements over 58.0 cm through 60.0 cm start at Large.
*3XL and 4XL are available on C6 PRO only.
| Helmet Size | Head Circumference CM | Head Circumference IN | Hat Size IN |
|---|---|---|---|
| XS | 53 – 54 cm | 20 7/8" – 21 1/4" | 6 5/8 – 6 3/4 |
| S | 55 – 56 cm | 21 5/8" – 22" | 6 7/8 – 7 |
| M | 57 – 58 cm | 22 1/2" – 22 7/8" | 7 1/8 – 7 1/4 |
| L | 59 – 60 cm | 23 1/4" – 23 5/8" | 7 3/8 – 7 1/2 |
| XL | 61 – 62 cm | 24" – 24 3/8" | 7 5/8 – 7 3/4 |
| 2XL | 63 – 64 cm | 24 3/4" – 25 1/8" | 7 7/8 – 8 |
| 3XL | 65 – 66 cm | 25 5/8" – 26" | 8 1/8 – 8 1/4 |
| 4XL | 67 – 68 cm | 26 3/8" – 26 3/4" | 8 3/8 – 8 1/2 |
| Helmet Size | Head Circumference CM | Head Circumference IN | Hat Size IN |
|---|---|---|---|
| S | 38.4 – 40.6 cm | 15 1/8" – 16" | 4 4/5 – 5 |
| M | 41 – 43.2 cm | 16 1/8" – 17" | 5 1/8 – 5 2/5 |
| L | 43.5 – 45.7 cm | 17 1/8" – 18" | 5 4/9 – 5 3/4 |
Fitment Guide
How Your Helmet Should Fit
Why Proper Fitment Matters
The performance and safety of your helmet depend on a correct fit. A properly fitted helmet should remain securely positioned, provide consistent contact around the head, and not move freely.
Checking The Fit
- The inner lining should feel snug around the top and sides of your head.
- The top pad should press gently on the crown of your head.
- Cheek pads should firmly contact your cheeks where applicable.
- You should not be able to easily slip two fingers between your temple and the helmet.
Movement Test
- Buckle the chin strap.
- Hold the helmet firmly on each side.
- Move it side-to-side and up-and-down.
- The helmet should move your skin rather than slide freely.
Signs It May Be Too Big
- The helmet slides on with very little resistance.
- It feels loose around the crown.
- It shifts independently when you move your head.
- It can be moved significantly without pulling the skin.
Signs It May Be Too Small
- The helmet is extremely difficult to put on.
- You experience immediate concentrated pressure points.
- You experience sharp pain rather than normal snug pressure.
- Pressure remains excessive after allowing a reasonable fit check.
Correct Fit
- The helmet requires some effort to slide on.
- It feels snug around the crown without sharp pain.
- The helmet remains securely positioned.
- It does not move freely or independently from your head.
Sizing Disclaimer
Online sizing is a recommended starting point only. Sizing may vary by helmet model, head shape, hairstyle, head wraps, comfort preference, and break-in. Do not base your Daytona Helmet size solely on another brand, another helmet style, or a different Daytona model. Always confirm final fit before riding.